Barracuda Networks Firewall X100 Uživatelská příručka stáhnout pdf (Strana 107)

Remote Address

Enter .213.47.0.253

The WAN IP address of location 2.

Remote Networks

Enter ./2410.10.20.0

The .remote LAN

Specify these authentication settings:

Setting Value

Authentication Select . Shared Passphrase

Passphrase

Enter the shared secret.

Click .Add

Step 2. Create the IPsec Tunnel on the Barracuda Firewall at Location 2

To create the IPsec tunnel:

Log into the Barracuda Firewall at Location 2.

Go to the page.VPN > Site-to-Site Tunnels

In the Site-to-Site IPSec Tunnels section, click Add .

Enter a Name for the new VPN tunnel.

In the and sections, specify these settings:Phase 1 Phase 2

Setting Value

Encryption Phase 1 & 2 Select . AES256

Hash Method Phase 1 & 2 Select .MD5

DH Group Phase 1 & 2 Select .Group 1

Lifetime Phase 1

Enter .28800

Lifetime Phase 2

Enter .3600

Specify these network settings:

Setting Value

Local End Select . Passive

Local Address

Select one of the available IP addresses. If you have dynamic

ISPs configured, select .Dynamic

Local Networks

Enter ./2410.20.10.0

The network address for the locally configured LAN.

Remote Address

Enter .213.47.0.253

The WAN IP address of location 1.

Remote Networks

Enter ./2410.10.10.0

The .remote LAN

Specify these authentication settings:

Setting Value

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 141 142

Komentáře k této Příručce

Žádné komentáře

Barracuda Networks Firewall X100 Uživatelská příručka Strana 107

Komentáře k této Příručce